back to course homepage

MCLab Demos, Tests and Tutorial Programs

ATmega16 Board | Simple I/O Board | Board Tests | Other Programs

ATmega16

Call tar -xzf <archivename>.tgz to extract the files (they will be extracted into a subdirectory) and read the README file.

M16 v1.3/v1.4.1 (USB)

(Makefile also supports serial programming, you only need to change some macros in the Makefile)

M16 v1.1 (serial)

Simple I/O Board

SIO Tutorial v1.3/1.4.1 (USB)
SIO Tutorial v1.1 (serial)

Board Test Programs

The following programs can be used to test the hardware.

M16 v1.3/v1.4.1 (USB)

(Makefile also supports serial programming, you only need to change some macros in the Makefile)

M16 v1.1 (serial)

SIO (use the tutorial for testing)
UART v1.1
Motor boards v1.1
Chipcard reader v1.1

Other Programs

Oscilloscope

back to course homepage